URF and SRF stick documents

URF and SRF stickDOCUMENTs

Description

The URF and the SRF stick are both aimed at allowing computers or micro-controllers with a USB port to connect to radio devices. The SRF stick comes in a sealed USB stick housing and has been configured to have USB serial connected to the radio transceiver. The URF is a board to which a jumper can be afixed. Inserting the jumper causes the USB serial data to be connected to the on-board FTDI serial lines, bypassing the radio transceiver.

URF 30 Second Introduction 

Technical data

 

Build instructions

Both the URF and the SRF-stick come ready built

Tutorials

Ciseco Radio Unit Configuration Guide

URF - How to install 

URF Use and Installation 

USB Interface - how to install 

ADVANCED / DEPRICATED

URF Firmware Update 

Downloads

 

Projects / Blogs